Unlocking the Therapeutic Potential of Freshwater Sapropel Extracts: In Vitro Analysis and Antioxidant Profiling for Skincare Applications.

Background and Objective: Sapropel, a biologically active sedimentary deposit, is high in organic matter and minerals and has been shown to offer health benefits. Its constituents, humic acid (HA) and fulvic acid (FA), have been found to have some therapeutic applications. The aim of this study was to determine the potential therapeutically significant properties of freshwater sapropel extracts: their polyacid content, antioxidative (AO) status, and biological activity in cell culture. Materials and Methods: Freshwater lakes from the southeast region of Latvia were investigated layer by layer. The total organic carbon (TOC) was determined through combustion using the catalytic oxidation method, HA and FA were measured via acid perspiration, and the total polyphenol content (TPC) and total antioxidant status (TAS) was analysed spectrophotometrically. Sapropel extracts' regenerative abilities were tested in vitro using a Cell-IQ real-time monitoring system on mouse BALB/c 3T3 fibroblasts and human keratinocyte HaCaT cell lines. Cytotoxicity was measured through neutral red uptake assessment as a concentration-dependent reduction in the uptake of neutral red dye relative to a vehicle control or untreated cells. Results: The highest AO activity was observed in sapropel extracts with elevated concentrations of HA and TPC from Audzelu Lake (1.08 ± 0.03 mmol/L), and the lowest activity was found in extracts from Ivusku Lake (0.31 ± 0.01 mmol/L). Correspondingly, the concentrations of HA in Audzelu and Ivusku Lakes were recorded as 45.2 and 27.4 mg/g, respectively. High concentrations of HA promoted in vitro cell growth upon short-term exposure (up to 6 h). Conclusions: The results show that high TPC correlates with AO status and sapropel extracts with higher concentrations of HA exhibit greater AO activity and promote in vitro cell growth, suggesting a perspective use for short-term topical therapeutic skin applications. However, higher concentrations over longer durations showed cytotoxic effects, indicating the need for further investigation.

Sternocleidomastoid Muscle and Head Position: How to Minimize Muscle Tension.

OCCUPATIONAL APPLICATIONSThe coronavirus disease pandemic has changed the setting of many jobs, forcing people to switch to remote work. In turn, telework is associated with an increased risk of musculoskeletal disorders, as it is difficult to ensure an ergonomically correct work environment at home. Complaints of headaches, neck pain, and dizziness are reported by both young and old people. One of the reasons for such complaints might be an incorrect head position and prolonged tension in the neck muscles that is directly correlated with a spatially misaligned computer monitor and peripherals. We examined biomechanical parameters of the sternocleidomastoid muscle and found that it is possible to reduce tension in this muscle by keeping the head in an appropriate angular range to minimize potential health risks.

Background: With the increasing demand for faster data processing, computers and other smart devices have become an integral part of many workplaces. The sternocleidomastoid (SCM) muscle is one of the main muscles supporting the head. A review of the available literature suggested that overuse of this muscle can provoke a number of complaints among employees, including head and neck pain. This article describes effective head positioning angles to minimize SCM muscle strain.Purpose: The main objective of this study was to determine how SCM muscle tension changes with head position angle. We hypothesized that the SCM muscle would demonstrate the least tension when the head is in a neutral position.Methods: A total of 41 individuals (22 female, 19 male) participated. Only respondents without chronic conditions were included. SCM muscle tension was measured using a myotonometer.Results: Strong positive correlations were observed between angle (head position) and SCM muscle tension (oscillation frequency) as well as between angle and SCM muscle stiffness. Negative correlations were found between head angle and SCM decrement (a measure of elasticity), and between head angle and SCM relaxation time.Conclusions: Minimal tension in SCM muscle occurs when the head is positioned in flexion, at angles between −30° and −60°. Determining the angle of minimal SCM tension provides a foundation for further research and various technical solutions that may ensure such positioning (e.g., a monitor arm). However, to obtain more accurate insight into optimal positioning, simultaneous evaluation of multiple neck muscles should be completed in future work, and the neck extensor muscle group must be addressed.

Pain Among Latvian Workers: General Prevalence vs. Registered Occupational Diseases.

The problem of painful and disabling work-related musculoskeletal disorders (MSDs) is increasing in many employment sectors of Latvia. Official statistics may underestimate the proportion of affected employees, causing delays in preventive interventions, ineffective rehabilitation, and a reduction of the workforce. This study investigated the prevalence of painful health conditions among Latvian workers by analyzing survey data and comparing these to official statistics on registered occupational diseases (ODs). A total of 2,446 workers participated in the state-level "Work conditions and risks in Latvia, 2017-2018" survey that included questions about pain lasting longer than 3 days during the previous year. The frequency of subjective reports on the presence, severity, and location of pain and related behaviors was assessed in relation to sex, age, education, and job position. Descriptive statistics and cross tabulation with the chi-squared test as well as multinomial logistic regression were applied to the data. Overall, 27.7% of respondents (n = 678) reported experiencing pain, predominantly in the lower back (14.3%) and mostly moderate (47.1%) or severe (45.1%). Only one-fifth of respondents (20.5%) took sick leave from work and one-third (29.0%) did not take action to alleviate their pain. Participants aged 55-74 years had a significantly higher odds ratio (OR) for pain in at least one body region-including hands and legs-than those aged 18-24 years. Women had significantly higher odds of headache (OR = 2.55) and neck pain (OR = 1.85) than men. Respondents with a primary or elementary education level had higher odds of pain in at least one body region (OR = 1.60) and in the lower back (OR = 1.86), while those with secondary education had higher odds of pain in hands (OR = 1.51) than employees with higher education. Unskilled workers had significantly higher odds of pain in hands (OR = 2.42) and legs (OR = 2.12) than directors. Official data revealed a dramatic increase in the proportion of MSDs and related disabilities in the last decade, reaching 75.5% of all first registered ODs in 2019. These results demonstrate a high prevalence of painful conditions among Latvian employees; urgent attention to diagnostics, treatment, and prevention is needed to ensure the musculoskeletal health and productivity of this population.

Indoor Air Radon Concentration in Premises of Public Companies and Workplaces in Latvia.

Considering the multitudes of people who spend their time working indoors in public premises and workplaces, it is worth knowing what their level of exposure is to natural radioactive radon gas, the second most widespread and dangerous carcinogen for lung cancer development after cigarette smoking. This state-level study covered most of the territory of Latvia and conducted 941 radon measurements with Radtrack2, placed for 4-6 months in the premises of public companies, educational institutions, medical care institutions, etc. The study found that 94.7% of samples did not exceed the national permissible limit (200 Bq/m3), the level at which preventive measures should be initiated. The median value of average specific radioactivity of radon in these premises was 48 Bq/m3 (Q1 and Q3 being 27 and 85 Bq/m3), which is below the average of the European region. Slightly higher concentrations were observed in well-insulated premises with plastic windows and poorer air exchange, mostly in schools (59 (36, 109) Bq/m3) and kindergartens (48 (32, 79) Bq/m3). Industrial workplaces had surprisingly low radon levels (28 (16, 55) Bq/m3) due to strict requirements for air quality and proper ventilation. Public premises and workplaces in Latvia mostly have low radon concentrations in the air, but more attention should be paid to adequate ventilation and air exchange.

Harmonized definition of occupational burnout: A systematic review, semantic analysis, and Delphi consensus in 29 countries.

Objective A consensual definition of occupational burnout is currently lacking. We aimed to harmonize the definition of occupational burnout as a health outcome in medical research and reach a consensus on this definition within the Network on the Coordination and Harmonisation of European Occupational Cohorts (OMEGA-NET). Methods First, we performed a systematic review in MEDLINE, PsycINFO and Embase (January 1990 to August 2018) and a semantic analysis of the available definitions. We used the definitions of burnout and burnout-related concepts from the Systematized Nomenclature of Medicine Clinical Terms (SNOMED-CT) to formulate a consistent harmonized definition of the concept. Second, we sought to obtain the Delphi consensus on the proposed definition. Results We identified 88 unique definitions of burnout and assigned each of them to 1 of the 11 original definitions. The semantic analysis yielded a first proposal, further reformulated according to SNOMED-CT and the panelists` comments as follows: "In a worker, occupational burnout or occupational physical AND emotional exhaustion state is an exhaustion due to prolonged exposure to work-related problems". A panel of 50 experts (researchers and healthcare professionals with an interest for occupational burnout) reached consensus on this proposal at the second round of the Delphi, with 82% of experts agreeing on it. Conclusion This study resulted in a harmonized definition of occupational burnout approved by experts from 29 countries within OMEGA-NET. Future research should address the reproducibility of the Delphi consensus in a larger panel of experts, representing more countries, and examine the practicability of the definition.

The effect of different workplace nanoparticles on the immune systems of employees.

Currently, nanoparticles are widely present in the environment and are being used in various industrial technologies. Nanoparticles affect immune functions, causing different immune responses. The aim of the current study was to evaluate several cytokines, interleukin (IL)-1b, IL-6, IL-8, tumour necrosis factor-a (TNF-α), interferon-γ, adhesive molecule sICAM-1, macrophage inhibitory protein 1a (MIP1a) and secretory immunoglobulin A, in nasal lavage fluid and in the peripheral blood of healthy subjects exposed to workplace nanoparticles. Thirty-six employees from three different environments were examined: 12 from a metalworking company, 12 from a woodworking company and 12 office workers. The nanoparticles in the different workplaces were detected in the air in the immediate vicinity of the employees. The particle number concentration and surface area values were significantly higher in the workplaces of the metal- and woodworking industries, but concentrations of mass were lower (the measurements were performed by an electrical low-pressure impactor ELPI+). Energy dispersive X-ray spectroscopy (EDS, an attachment to a high-resolution SEM) was used to provide elemental analysis or chemical characterization of the dust particles in a low-vacuum field-free mode operating at a potential of 15 kV spot 3.0. The technique used provided quantitative and spatial analyses of the distribution of elements through mapping (two to three parallel measurements) and point analysis (four to five parallel measurements). Samples from the metal industry contained more ultramicroscopic and nanometric particles, e.g. toxic metals such as Zn, Mn and Cr, and fewer microscopic dust particles. The nasal lavage and peripheral blood were taken at the beginning and the end of the working week, when immune indices were measured. Our data showed a statistically significant increased level of the pro-inflammatory cytokine TNF-α in serum in both exposed groups compared with office workers as well as a higher level of TNF-α in workers from the woodworking company compared with the metalworking employees. We found an elevated level of IL-6 in the exposed groups as well as an elevated level of IL-8 in the nasal lavage in woodworking employees after work.

Wrist Hypothermia Related to Continuous Work with a Computer Mouse: A Digital Infrared Imaging Pilot Study.

Computer work is characterized by sedentary static workload with low-intensity energy metabolism. The aim of our study was to evaluate the dynamics of skin surface temperature in the hand during prolonged computer mouse work under different ergonomic setups. Digital infrared imaging of the right forearm and wrist was performed during three hours of continuous computer work (measured at the start and every 15 minutes thereafter) in a laboratory with controlled ambient conditions. Four people participated in the study. Three different ergonomic computer mouse setups were tested on three different days (horizontal computer mouse without mouse pad; horizontal computer mouse with mouse pad and padded wrist support; vertical computer mouse without mouse pad). The study revealed a significantly strong negative correlation between the temperature of the dorsal surface of the wrist and time spent working with a computer mouse. Hand skin temperature decreased markedly after one hour of continuous computer mouse work. Vertical computer mouse work preserved more stable and higher temperatures of the wrist (>30 °C), while continuous use of a horizontal mouse for more than two hours caused an extremely low temperature (<28 °C) in distal parts of the hand. The preliminary observational findings indicate the significant effect of the duration and ergonomics of computer mouse work on the development of hand hypothermia.

Telomere length in Chernobyl accident recovery workers in the late period after the disaster.

The outcome of the Chernobyl nuclear power plant (CNPP) accident was that a huge number of people were exposed to ionizing radiation. Previous studies of CNPP clean-up workers from Latvia revealed a high occurrence of age-associated degenerative diseases and cancer in young adults, as well as a high mortality as a result of cardiovascular disorders at age 45-54 years. DNA tandem repeats that cap chromosome ends, known as telomeres, are sensitive to oxidative damage and exposure to ionizing radiation. Telomeres are important in aging processes and carcinogenesis. The aim of this study was to investigate the long-term effect of protracted ionizing radiation exposure on telomere length in CNPP clean-up workers. Relative telomere length (RTL) was measured in peripheral blood leukocytes of 595 CNPP clean-up workers and 236 gender- and age-matched controls using real-time quantitative polymerase chain reaction (q-PCR). Close attention was paid to participation year and tasks performed during the worker's stay in Chernobyl, health status, and RTL differences between subgroups. Telomere shortening was not found in CNPP clean-up workers; on the contrary, their RTL was slightly greater than in controls (P = 0.001). Longer telomeres were found in people who worked during 1986, in those undertaking 'dirty' tasks (digging and deactivation), and in people with cancer. Shorter telomeres appeared frequently in those with cataract, osteoporosis, atherosclerosis, or coronary heart disease. We conclude that the longer telomeres revealed in people more heavily exposed to ionizing radiation probably indicate activation of telomerase as a chromosome healing mechanism following damage, and reflect defects in telomerase regulation that could potentiate carcinogenesis.